Ultraturb seawater sc, turbidity sensor, 5 m cable

Ultraturb seawater sc, turbidity sensor, 5 m cable
Productnr.: LPV415.99.22001
Prijs per eenheid Neem contact op
Wordt binnen 1 week verzonden

Large measuring range: 0.0001 - 1,000 NTU

The Hach Ultraturb plus sc Sensor measures turbidity from 0 - 1000 NTU (FNU) for a wide variety of low to medium range turbidity applications. Use it to effectively monitor conventional filtered water processes, effluent water, distribution systems, and elevated tanks where small-sized particulates or air entrapment may be an issue.

Self-Cleaning Sample Chamber Option

The Ultraturb sensor is available with an automatically self-cleaning sample chamber that guarantees stable measured values. The silicon wiper blades inside the sample chamber are held in place with a magnetic coupling wheel to further keep the sample chamber intact.

Ratio Methodology Detects Sample Chamber Fouling

The Ultraturb sensor uses ratio methodology with detection at 90° and 180° to minimize reflections in the measuring cell and on the windows. In this way, fouling of the sample chamber is detected earlier than with a single detection system.

Suitable for seawater, brackish water, raw water and other applications

The new Ultraturb seawater sc is resistant to salt concentrations up to 65 g/L.

Wat zit er in de doos

Hach Ultraturb sc, Factory Test Certificate, 4 wipers, Accessory set LZP816, User Manual

Specificaties

Afmetingen (H x B x D): 240 mm x 250 mm x 110 mm
Afvoer: 13 mm ID Tubing or fixed connection (PVC system component pipework)
Automatische Wisser: Ja
Beschermingsklasse: IP55
Display: Display provided through connection with digital Hach SC Controller
Druk bereik: 6 bar at 20 °C (87 psi at 68 °F)
Garantie: 24 maanden
Gewicht : Approx. 1.5 kg
Herhaalbaarheid: ± 0.003 FNU or ± 0.5% of reading (whichever is greater) from 0 - 2 FNU
Kabel lengte: 5 m
Kalibratie methode: Stablcal
Materiaal: Housing: ASA; Window: Quartz; Wiper Blade: Silicon; Wiper Shaft: stainless steel 1.4571
Meetbereik: 0.0001 - 1000 FNU (TE/F, NTU, FNU) can be programmed as required (0.001-250 EBC = 2500 ppm SiO2) (Note: 1 FNU is equivalent to 1 NTU)
Meetmethode: 90° infrared pulse scattered light technique in accordance with DIN EN ISO 7027
Model: Ultraturb seawater sc
Monster stroomsnelheid: 0.2 to 1 L/min
Monster temperatuur: Max. 50 °C (122 °F)
Nauwkeurigheid: ± 0.008 FNU ±1% of reading whichever is greater
(0 - 10 FNU)
Omgevingstemperatuur: 2 - 40 °C (36 - 104 °F)
Responstijd: 1 - 60 s (programmable)
Sensor reiniging: Wiper, automatic
Toevoer: 13 mm ID Tubing or fixed connection (PVC system component pipework)
Verificatie: Stablcal or dry standard CVM module
Wat zit er in de doos: Hach Ultraturb sc, Factory Test Certificate, 4 wipers, Accessory set LZP816, User Manual