Ultraturb Seawater sc Turbidity Sensor, 1 m Cable

Ultraturb Seawater sc Turbidity Sensor, 1 m Cable
Productnr.: LPV415.99.82001
Prijs per eenheid Neem contact op

Large measuring range: 0.0001 - 1.000 NTU

The Hach Ultraturb Seawater sc sensor measures turbidity from 0.0001 to 1000 FNU (NTU) for a wide variety of low to medium range turbidity applications. Use it to effectively monitor conventional filtered water processes, effluent water, distribution systems, and elevated tanks where small-sized particulates or air entrapment may be an issue.

Self-cleaning Sample Chamber

The Ultraturb Seawater sc sensor is available with an automatically self-cleaning sample chamber that guarantees stable measured values. The silicon wiper blades inside the sample chamber are held in place with a magnetic coupling wheel to further keep the sample chamber intact.

Ratio Methodology Detects Sample Chamber Fouling

The Ultraturb Seawater sc sensor uses ratio methodology with detection at 90° and 180° to minimize reflections in the measuring cell and on the windows. In this way, fouling of the sample chamber is detected earlier than with a single detection system. The sensor meets the ISO 7027 turbidity requirements for online process turbidity.

Suitable for seawater, brackish water, raw water and other applications

The new Ultraturb Seawater sc is resistant to salt concentrations up to 65 g/L.

Compatible with Hach Multi-Sensor, Multi-Parameter Digital Controller

The Ultraturb Seawater sc sensor can be used with Hach’s Digital SC Controllers. The SC4500 controller accepts up to two sensors and the SC1000 accepts up to eight sensors. Multiple controllers can be networked to accommodate many more sensors and parameters, reducing the cost per measuring point. Just plug in any Hach “plug and play” digital sensor and it’s ready to use without software configuration. “Plug and play” connectivity means there’s no complicated wiring or set up. Network the Ultraturb Seawater sc sensor with any of Hach’s digital sensors for measuring dissolved oxygen, ORP, conductivity, and many other parameters.

Wat zit er in de doos

Hach Ultraturb sc, Factory Test Certificate, 4 wipers, Accessory set LZP816, User Manual

Specificaties

Afmetingen (H x B x D): 240 mm x 250 mm x 110 mm
Afvoer: 13 mm ID Tubing or fixed connection (PVC system component pipework)
Automatische Wisser: Ja
Beschermingsklasse: IP55
Controller compatibiliteit: SC4500, SC1000, SC200
Display: Display provided through connection with Hach SC4500 Digital Controller or Hach SC1000 Universal Controller
Druk bereik: 6 bar at 20 °C
Garantie: 24 maanden
Gewicht : Approx. 1.5 kg
Herhaalbaarheid: ± 0.003 FNU or ± 0.5% of reading (whichever is greater) from 0 - 2 FNU
Kabel lengte: 1 m
Kalibratie methode: Stablcal
Materiaal: Housing: ASA; Wiper Blade: Silicon; Wiper Shaft: Stainless steel 1.4571
Meetbereik: 0.0001 - 1000 FNU freely programmable (0.0001 - 250 EBC = 2500 ppm SiO₂)
Meetmethode: 90° infrared pulse scattered light technique in accordance with DIN EN ISO 7027
Model: Ultraturb seawater sc
Monster stroomsnelheid: 0.2 - 1 L/min
Monster temperatuur: Max. 50 °C (122 °F)
Nauwkeurigheid: ± 0.008 FNU ±1% of reading whatever is greater
(0 - 10 FNU)
Omgevingstemperatuur: -10 - 40 °C (Display Unit)
Resolutie: 0.0001 - 0.9999 / 1.000 - 9.999 /
10.00 - 99.99 / 100 - 1000 FNU (NTU)
Responstijd: 1 - 60 s (programmable)
Sensor reiniging: Wiper, automatic
Toevoer: 13 mm ID Tubing or fixed connection (PVC system component pipework)
Verificatie: Stablcal
Wat zit er in de doos: Hach Ultraturb sc, Factory Test Certificate, 4 wipers, Accessory set LZP816, User Manual