Uiterst nauwkeurige TU5400sc lasertroebelheidsmeter voor laag bereik met automatische reiniging en systeemcontrole, EPA-versie

Uiterst nauwkeurige TU5400sc lasertroebelheidsmeter voor laag bereik met automatische reiniging en systeemcontrole, EPA-versie
Productnr.: LXV445.99.31212
Prijs per eenheid Neem contact op
Wordt binnen 1 week verzonden

Groundbreaking 360° x 90° Detection Technology

The TU5 Series employs a unique optical design that sees more of your sample than any other turbidimeter, delivering the best low level precision and sensitivity while minimizing variability from test to test.

Matching lab and online results

For the first time you will be able to remove the uncertainty of which measurement to trust, thanks to identical 360° x 90° Detection Technology in both instruments.

Everything about turbidity – faster

The TU5 Series dramatically reduces the time needed to get a turbidity measurement you can rely on, with 98% less online sample surface area to clean, sealed vials for calibration, and the elimination of the need for indexing and silicone oil in the lab. Not to mention, a smaller online sample volume means you will detect events almost immediately.

No surprises

Prognosys monitors your TU5 Series online instrument, proactively alerting you to maintenance needs before your measurement becomes questionable. And a Hach Service Agreement protects your investment and helps ensure that you stay in compliance and on budget.

Wat zit er in de doos

TU5400sc troebelheidsmeter, Automatisch reinigingssysteem, Gebruikershandleiding, Wandmontage, Kuvetvervangingsgereedschap, Schroevenset, Droogmiddelpatroon, Klep, Servicebeugel, Kalibratiespuit, Stablcal-oplossing

Specificaties

Afmetingen (H x B x D): 249 mm x 268 mm x 190 mm
Bedrijfsomstandigheden: Relatieve vochtigheid: 5 - 95 % bij verschillende temperaturen, niet-condenserend
Beschermingsklasse: Elektronisch compartiment IP55; alle andere functionele eenheden IP65 met proceskop / ACM bevestigd aan het TU5300sc / TU5400sc-instrument
Certificering: CE conform
Amerikaans FDA-registratienummer: 1420493-000 EPA-versie, 1420492-000 ISO-versie
Is in overeenstemming met IEC/EN 60825-1 en 21 CFR 1040.10 conform Laser Notice No. 50)
Australische ACMA-markering
Communicatie: Systeemcontrole
Controller: Alleen sensor
Detectiegrens: 0.0001 NTU
Eenheid: NTU, FNU, TE/F, FTU, EBC
Garantie: 24 maanden
Gewicht : 2,7 kg (5,0 kg met alle accessoires)
Herhaalbaarheid: Beter dan 1 % van meetwaarde van ±0,0006 NTU voor formazine bij 25 °C (77 °F), welke van beide groter is
Instrument: Met automatische reinigingsmodule
Kabel lengte: 1,6 m, verlengbaar tot 50 m voor instrument zonder accessoires
Kalibratie methode: Voor Formazin en Stablcal:
20 NTU van 0 - 40 NTU; bij 20 FNU en 600 NTU voor volledig meetbereik

Aangepaste kalibratie voor max. 6-punts kalibraties
Lichtbron: Product met laser van klasse 2, met geïntegreerde 650 nm (EPA 0,43 mW) of product met laser van klasse 1, met geïntegreerde 850 nm (ISO), max. 0,55 mW (conform IEC/EN 60825-1 en 21 CFR 1040.10 in overeenstemming met Laser Notice No. 50)
Materiaal: ASA Luran S 777K / RAL7000, TPE RESIN Elastocon STK40, thermoplastisch elastomeer TPS-SEBS
Meetbereik: EPA:
0 - 700 NTU / FNU / TE/F / FTU
0 - 175 EBC
Model: TU5400sc
Monster druk: Maximaal 6 bar vergeleken met lucht-monster van 2 tot 40 °C
Monster stroomsnelheid: 100 - 1000 mL/min; optimale stroomsnelheid: 200 - 500 mL/min
Monster temperatuur: 2 - 60 °C
Montage: Monstersnelkoppeling: ¼-inch voor ¼-inch leiding
Montageconfiguratie: Wandmontage
Nauwkeurigheid: ±2 % van meetwaarde plus 0,01 NTU van 0 - 40 NTU
Omgevingstemperatuur: 0 - 50 °C
Opslag condities: -40 - 60 °C
Opties: Proceskop met automatische reinigingsmodule
Regelgeving: EPA
Region: Globaal (alleen sensor)
Resolutie: 0,0001 NTU / FNU / TE/F / FTU / EBC
Responstijd: T90 <30 seconden bij 100 mL/min
Strooilicht: <10 mNTU
Stroom vereisten (spanning): None
Systeemcontrole: Ja
Tijdsgemiddeld signaal: 1 - 90 seconden
Verificatie: Vloeistof: Stablcal, Formazine (0,1 tot 40 NTU)
Droog: glazen staaf bij <0,1 NTU
Wat zit er in de doos: TU5400sc troebelheidsmeter, Automatisch reinigingssysteem, Gebruikershandleiding, Wandmontage, Kuvetvervangingsgereedschap, Schroevenset, Droogmiddelpatroon, Klep, Servicebeugel, Kalibratiespuit, Stablcal-oplossing